Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Archive Multiproject Exit-Code 304

Created by: Import-User-1 at: 5/9/2006 9:19 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

5/9/2006 9:19 PM	Rate (0)
Import-User-1 Gold Member Joined: 8/10/2005 Last visit: 2/7/2022 Posts: 3609 Rating: (28)	Thread was posted in the german spoken Forum: [quote user="RonnyD"] ~~I have the same problem.~~ When I archive the multiproject I get an error Exit code 304. I tried save as with reorganize. I still had the error. I archived all the projects separately. There was no problem. What else can I do? Ronny Dortland Thereare answers in german spoken Forum: /tf/WW/en/Posts/2572#11254
	Last edited by: Import-User-1 at: 5/9/2006 9:25 PM
Suggestion To thank Quote Answer

5/10/2006 3:53 PM	Rate (0)
Cicero Gold Member Joined: 10/10/2005 Last visit: 6/9/2023 Posts: 1909 Rating: (132)	Hello, regarding to your inquiry we would like to inform you. In refer to your message in refer to the archive problem with multiprojects it could be the following reasons: You have one or more optional software (S7-GRAPH, CFC, ...) which version is not compatible with your STEP 7 version or your operating system. We recommend to check with the compatibility list the installed software and if neccessery to install an actual update software. It is possible that the STEP 7 version is not compatible with the installed operating system and you need an update (SP of Windows and or new upgrade version of STEP 7). Check also the free space of your hard disk where do you want to archive your project, it is possible, that there is not enoughfree space in the store file. We recommend also to check the virtual work memory and adjust this memory in this case (example 1500 MB). With best regards Cicero

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on