Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Archive / Retrieve in WINCC Flex

Created by: DaveA at: 9/23/2008 5:21 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

9/23/2008 5:21 PM	Rate (0)
DaveA Advanced Member Joined: 8/8/2008 Last visit: 12/9/2022 Posts: 78 Rating: (4)	Hi there. This might be a bit of a rather stupid question but im going to ask it anyways as it is starting to annoy a few of us. How do you use the Archive and Retrieve function in WINCC Flex, which can be found under Project on the taskbar. I have had a lookat the PDFs I havebut could not find information on how to do it? Maybe it is on here but I cannot seem to locate it I am currently running: WINCC Flex 2007, Hotfix 4. Many Thanks.

Suggestion To thank Quote Answer

9/23/2008 6:09 PM	Rate (0)
ZAK Gold Member Joined: 5/8/2006 Last visit: 1/29/2021 Posts: 1085 Rating: (76)	Hi, maybe this faq will help you: http://support.automation.siemens.com/WW/view/de/26190516 Bye

Suggestion To thank Quote Answer

9/23/2008 7:06 PM	Rate (0)
FunStuff Posts: 103 Rating: (10)	I believe this is the FAQ you are looking for. -> http://support.automation.siemens.com/WW/view/en/21896449
FunStuff Posts: 103 Rating: (10)
Suggestion To thank Quote Answer

9/29/2008 9:34 AM	Rate (0)
DaveA Advanced Member Joined: 8/8/2008 Last visit: 12/9/2022 Posts: 78 Rating: (4)	Many Thanks, was a big help

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on