Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

AS-i safety monitor module

Created by: sukesh at: 5/25/2007 1:39 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

5/25/2007 1:39 PM	Rate (0)
sukesh Member Joined: 5/25/2007 Last visit: 5/25/2007 Posts: 1 Rating: (0)	hi... iam using an AS-i safety monitor module. (3RK11051BE042CA0). can somebody tell me how to address this module, becos there is no addressing port on this module.there is only one rj 45 port on this module.then how do i use addressing tool withthis module.... awaiting for ur reply thanks in advance ......

Suggestion To thank Quote Answer

5/25/2007 2:25 PM	Rate (0)
Thijs Posts: 121 Rating: (16)	The AS-i safety monitor can work without an adress. If you do need to give it an adres you have to do it within the configuration software off the monitor.
Thijs Posts: 121 Rating: (16)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on