Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

as offset activate TIA PORTAL V12, can someone help me set up ..?

Created by: marco23 at: 7/16/2013 9:22 PM (5 Replies)

Rating (0)

Thanks 0

6 Entries

7/16/2013 9:22 PM	Rate (0)
marco23 Posts: 24 Rating: (0)	as offset activate TIA PORTAL V12, can someone help me set up ..? attached a picture of the problem ... Attachment offset_1.jpg (629 Downloads)
marco23 Posts: 24 Rating: (0)	Last edited by: O_Moderator at: 7/19/2013 1:17 PM new subject after splitting from /tf/WW/en/Posts/64832#top
Suggestion To thank Quote Answer

7/16/2013 9:33 PM	Rate (0)
William_B Posts: 5225 Rating: (1198)	There are x2 types of datablock configurations. Using "optimised" is not going to make it possible to give address info. If it is in the "S7-300/400" access way - you will have this available (after compiling). You can not change the datablock after if has been created. Hope it helps. w
William_B Posts: 5225 Rating: (1198)
Suggestion To thank Quote Answer

7/16/2013 10:37 PM	Rate (0)
marco23 Posts: 24 Rating: (0)	leaves no option blocks access to Tia Portal v12 optimized. But in the version 11 if you leave the option optimized. is assumed that the version 12 is greater than the v11, or is there another way of programming in v12.
marco23 Posts: 24 Rating: (0)	Last edited by: marco23 at: 7/16/2013 10:54 PM
Suggestion To thank Quote Answer

7/17/2013 3:33 AM	Rate (0)
DS SURESH KUMAR Bronze Member Joined: 4/17/2012 Last visit: 11/26/2024 Posts: 474 Rating: (10)	marco23 leaves no option blocks access to Tia Portal v12 optimized. But in the version 11 if you leave the option optimized. is assumed that the version 12 is greater than the v11, or is there another way of programming in v12. Hi, Can you explian it , i am not able to understand sorry

Suggestion To thank Quote Answer

7/17/2013 9:27 AM	Rate (0)
William_B Posts: 5225 Rating: (1198)	Marco, (Italiano?) Please view the picture. The block access you are looking for comes from old style Step 7 V5.x. This is not wrong to use, but TIA software must know you use it this way. Please let us know if this helps you. w Attachment create DB or FB.jpg (653 Downloads)
William_B Posts: 5225 Rating: (1198)
Suggestion To thank Quote Answer

4/17/2016 5:57 PM	Rate (0)
Wit_Moderator Moderator Joined: 8/21/2014 Last visit: 1/20/2025 Posts: 1036 Rating: (14)	New question published by Santh is split to a separate thread with the subject Adding an offset in TIA Portal. Best regards The Helping Hand
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards Wit_Moderator
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on