Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

ASI MODULE 3RK 1207 1BQ00 OAA3 AND DP/ASILINK 20E

Created by: YANIS at: 6/25/2007 12:27 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

6/25/2007 12:27 PM	Rate (0)
YANIS Posts: 15 Rating: (0)	I have recently replaced analogue Asi modules type 3RK1207-1BQ00-0AA3, I cannot read analogue signals. I have some DP/ASi link 20E as ASi master to these modules. How can I get these modules to read analogue signals. The profile of the card is 7.2 Best Regards km
YANIS Posts: 15 Rating: (0)
Suggestion To thank Quote Answer

6/25/2007 3:34 PM	Rate (0)
J_Bell Posts: 5822 Rating: (412)	Hello Yanis, I am sorry but the Profile 7.2 has to be emulated by a FC, as far as I know. You will have to contact Customer Support to get these Functions. It will be a sample, as far as I know but it should work. Please contact Customer Support. Best regards J_Bell
J_Bell Posts: 5822 Rating: (412)
Suggestion To thank Quote Answer

6/25/2007 5:52 PM	Rate (0)
YANIS Posts: 15 Rating: (0)	HELLO J_BELL Isend a request to siemens suport. i'll give you a feed back . Best regards yanis
YANIS Posts: 15 Rating: (0)
Suggestion To thank Quote Answer

6/26/2007 10:11 AM	Rate (0)
J_Bell Posts: 5822 Rating: (412)	Hello Yanis, I surely appreciate this! Best regards J_Bell
J_Bell Posts: 5822 Rating: (412)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on