Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

ATOMAT CNC problem

Created by: sonar_1 at: 12/7/2013 6:07 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

12/7/2013 6:07 PM	Rate (0)
sonar_1 Posts: 1 Rating: (0)	Hallo !!! We have issue in own CNC Machine AT820 E CNC after the system boot the machine give to us the following error 120202 waiting for a connection the NC/PLC Please Advise
sonar_1 Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

9/25/2019 12:48 PM	Rate (0)
Soriasat Posts: 2 Rating: (0)	Hello , Every one I have same problem . What I can do ? Thank you .
Soriasat Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

9/25/2019 1:17 PM	Rate (0)
PISCEAN 2010 Diamond Expert Joined: 4/23/2010 Last visit: 11/23/2024 Posts: 8092 Rating: (880)	Please refer this link, where you will find numerous posts.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on