Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Automation License Manager Connection To MP277

Created by: daleb at: 12/11/2011 11:20 PM (3 Replies)

Rating (0)

Thanks 5

4 Entries

12/11/2011 11:20 PM	Rate (0)
daleb Posts: 2 Rating: (0)	Trying to connect and install my Sm@rtAccess license to one of our MP277 panels. Installing licenses and connecting to our other MP277 panels has not been an issue. We have one panel which we can ping and confirm network connectivity, but cannot connect to HMI device through the license manager. In Automation License Manager->Edit->Connect Target System->Connect HMI Device, then setting the connection type to Ethernet and making the Computer Name to the connected IP address. I am not able to connect to one of our 8 MP 277 panels using this method, I am able to connect to all the other MP panels using this same connection method. Error Reported is: Transfer error: 16842752 (0x1010000) - Connection Error.
daleb Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

12/12/2011 2:32 AM	Rate (0)
daleb Posts: 2 Rating: (0)	Figured it out....S7 Transfer setting in the MP277 control panel.... Attachment 12-11-2011 4-32-03 PM.jpg (869 Downloads)
daleb Posts: 2 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 5 thankful Users UMENCHO Wizard Sid835 AutoGen_7773456 BGutierrez

3/12/2020 9:44 AM	Rate (0)
edgar_d Member Joined: 9/19/2019 Last visit: 9/25/2023 Posts: 3 Rating: (0)	I have the same issue - but it does not help. Any other solutions?

Suggestion To thank Quote Answer

3/13/2020 4:17 AM	Rate (0)
Prof. Frink Platinum Expert Joined: 7/5/2013 Last visit: 10/3/2023 Posts: 2929 Rating: (475)	Hello edabautomation, edabautomation I have the same issue - but it does not help. Any other solutions? can you load the project software to the panel? Did you try to set the panel to Transfer mode? Regards, Frink
	Pi is exactly three! All you have to do is think of things which people need but which don’t exist yet.
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on