Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

AutostartRT command line

Created by: mglmansilla at: 10/10/2008 5:59 PM (7 Replies)

Rating (0)

Thanks 0

8 Entries

10/10/2008 5:59 PM	Rate (0)
mglmansilla Posts: 38 Rating: (0)	Is there any way to execute the autostart of wincc using command line ??? If I execute this command line: "C:\Archivos de programa\Siemens\WinCC\bin\AutoStartRT.exe" "F:\s7projs\ROM_HMI\ROM_HMI.MCP" /Activ:yes /LANG=ENU /EnableBreak:no It does not work, but I have noticed that this other application "C:\Archivos de programa\Siemens\WinCC\bin\CCProjectMgr.exe" -embedding is running in background, it works fine. But I can't start CCProjectMgr.exe in background. Any idea ??? Any suggestion ? Thanks in advance, Miguel
mglmansilla Posts: 38 Rating: (0)
Suggestion To thank Quote Answer

10/10/2008 6:43 PM	Rate (0)
DimiCamp Posts: 168 Rating: (49)	Hi! Try this: AutoStartRT.exe C:\YourAppPath\YourAppName.MCP /Activ:yes /LANG=ENU /EnableBreak:yes Best Regards, Dimitri.
DimiCamp Posts: 168 Rating: (49)
Suggestion To thank Quote Answer

10/10/2008 7:44 PM	Rate (0)
mglmansilla Posts: 38 Rating: (0)	Hi, this option enables the Cancel button. I have tried but it is not working ... The error message is: Error while opening the project "F:\s7projs\ROM_HMI\ROM_HMI.MCP. Autostart not possible. Any comment ? Miguel
mglmansilla Posts: 38 Rating: (0)
Suggestion To thank Quote Answer

10/10/2008 8:19 PM	Rate (0)
DimiCamp Posts: 168 Rating: (49)	Hi. This is working fine for me (WinCC 6.0 SP4): AutoStartRT.exe C:\MyAppPath\MyAppName.MCP /Activ:yes /LANG=ENU /EnableBreak:yes The last parameter (EnableBreak) sets the "Cancel Button" visibility, choose "yes" or "no".
DimiCamp Posts: 168 Rating: (49)
Suggestion To thank Quote Answer

10/10/2008 8:32 PM	Rate (0)
Dec Gold Expert Joined: 5/19/2006 Last visit: 12/3/2024 Posts: 549 Rating: (107)	What WinCC versiondo you have? Dec

Suggestion To thank Quote Answer

10/10/2008 8:55 PM	Rate (0)
mglmansilla Posts: 38 Rating: (0)	Hi, I am using WinCC v6.2 + Hotfix 10 If I open WinCC Explorer and after that I execute the command line it's working fine, but I can't execute WinCC Explorer, I only want the RT running ... I need in Windows startup the next sequence (batch file or something like that): - execute cleaning tasks - wait some seconds - execute autostartRT Thanks, Miguel
mglmansilla Posts: 38 Rating: (0)
Suggestion To thank Quote Answer

10/14/2008 10:54 PM	Rate (0)
Dec Gold Expert Joined: 5/19/2006 Last visit: 12/3/2024 Posts: 549 Rating: (107)	Hamletd, DimiCamp's command line should work fine, You don't need the entire path for AutoStartRT.exe since it's on the %PATH% env but you have to pay attentions using "" (Error while opening the project "F:\s7projs\ROM_HMI\ROM_HMI.MCP.Autostart not possible.) so bottom line the command: AutoStartRT.exe F:\s7projs\ROM_HMI\ROM_HMI.MCP /Activ:yes /LANG=ENU /EnableBreak:yes should work just fine Dec
	Last edited by: Dec at: 10/14/2008 10:56 PM Last edited by: Dec at: 10/14/2008 10:55 PM
Suggestion To thank Quote Answer

10/14/2008 11:48 PM	Rate (0)
mglmansilla Posts: 38 Rating: (0)	Yes, I had discovered the trouble, it was the "" in the project parameter ... Thanks everybody. Miguel
mglmansilla Posts: 38 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on