Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

backing up the project

Created by: stplanken at: 11/23/2006 5:39 PM (15 Replies)

Rating (1)

Thanks 0

Result pages:: |; 1 | 2; |

16 Entries

Entries per page: 10 | all

11/29/2006 9:13 PM	Rate (0)
stplanken Silver Member Joined: 3/4/2006 Last visit: 1/6/2025 Posts: 73 Rating: (3)	No, I selected the close and exit option. Is it documented somewhere that on closing a project the database is supposed to be detached? I am searching through the WinCC Information help but haven't found any reference to this yet.

Suggestion To thank Quote Answer

12/1/2006 10:13 AM	Rate (0)
Salma Gold Member Joined: 9/27/2005 Last visit: 11/27/2007 Posts: 1398 Rating: (151)	Not sure it is documented but I know that they should be detached. You could always confirm this with the hotline. Salma We dance in a circle and suppose,while the secret sits in the middle and knows

Suggestion To thank Quote Answer

12/4/2006 11:51 AM	Rate (0)
Ikkezelf Posts: 1084 Rating: (72)	I haven't checked with the hotline, but my experience is that the databases are NOT detached when you close & exit wincc. with regards, Ikkezelf
Ikkezelf Posts: 1084 Rating: (72)
Suggestion To thank Quote Answer

12/5/2006 12:39 AM	Rate (0)
stplanken Silver Member Joined: 3/4/2006 Last visit: 1/6/2025 Posts: 73 Rating: (3)	I just filled in an online support request form.

Suggestion To thank Quote Answer

12/5/2006 12:36 PM	Rate (0)
St. Claus Posts: 2 Rating: (0)	Hi, can You post the hotline result?
St. Claus Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

12/6/2006 9:31 PM	Rate (1)
stplanken Silver Member Joined: 3/4/2006 Last visit: 1/6/2025 Posts: 73 Rating: (3)	Apologies for the late reply. I asked if the databases are supposed to be detached automatically, here is the answer: ---quote--- In rare cases it might happen that when closing a WinCC project not all the the files are closed and detached. It is then not possible to access the data of the WinCC project or delete the project using the Microsoft Windows Explorer or archive the project using an archiving tool like Pkzip, for example. Remedy: Run the "Reset_WinCC".vbs" file by double-clicking it in the folder "...\Siemens\WinCC\Bin". Now you can execute the operation required. Note: If there is a space in the name of the WinCC installation directory, the databases are not detached when you terminate WinCC with "Reset_WinCC".vbs". This is the case, for example, with installations in English Windows 2000 / XP if WinCC is installed in the ...\Program Files\... folder. The "Reset_WinCC".vbs" file must only be used in exceptional cases and never used for fast termination of WinCC. ---end quote--- So it looks like the databases are supposed to be detached automatically when closing the project.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on