Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

backup from my MP277 connect SD Card or USB Drive

Created by: Suryansh Gautam at: 8/24/2014 8:50 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

8/24/2014 8:50 AM	Rate (0)
Suryansh Gautam Posts: 1 Rating: (0)	hi, I want to take backup from my MP277 but when I connect SD Card or USB Drive to it shows nothing is connected but when i connect mouse to that port it works . Please tell me how to unlock and to take the backup .
Suryansh Gautam Posts: 1 Rating: (0)	Last edited by: CS Moderator at: 8/25/2014 9:41 AM new subject after splitting from /tf/WW/en/Posts/72106#top
Suggestion To thank Quote Answer

8/24/2014 11:27 AM	Rate (0)
Ste39 Platinum Member Joined: 1/21/2013 Last visit: 11/20/2024 Posts: 4620 Rating: (710)	Suryansh Gautam hi, I want to take backup from my MP277 but when I connect SD Card or USB Drive to it shows nothing is connected but when i connect mouse to that port it works . Please tell me how to unlock and to take the backup . Hello, Try this: insert the SD Card, then go to Control Panel, then Backup/Restore ---> Press Backup Or follow point 2: Backup/Restore with a Memory Card: http://support.automation.siemens.com/WW/llisapi.dll/28928853?func=ll&objId=35840684&objAction=csView&lang=en&siteid=cseus&aktprim=0&extranet=standard&viewreg=WW&load=treecontent
	Last edited by: Ste39 at: 8/24/2014 1:51 PM
Suggestion To thank Quote Answer

11/29/2016 2:30 PM	Rate (0)
Min_Moderator Platinum Member Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4766 Rating: (122)	New question published by pakplc is split to a separate thread with the subject Backup restore is not working in MP277. Best regards Min_Moderator

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on