Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Backward convresion 5.4 to 5.3

Created by: usjwo at: 7/24/2007 3:42 PM (3 Replies)

Rating (2)

Thanks 0

4 Entries

7/24/2007 3:42 PM	Rate (0)
usjwo Posts: 36 Rating: (9)	Hi, Is it possible to convert the block from version 5.4 to 5.3. The project has been created in version 5.3, but some blocks have been opened and written in version 5.4. Now isn’t possible to open it in 5.3. How to convert it backward, any advice? Don’t tell me that I must copy it out again, please! Regards Usjwo
usjwo Posts: 36 Rating: (9)
Suggestion To thank Quote Answer

7/24/2007 5:20 PM	Rate (2)
Denilson Pegaia Platinum Member Joined: 9/23/2005 Last visit: 5/26/2023 Posts: 4184 Rating: (1341)	Hi, there is no garanty to backward convertion, but I suggest some tricks: 1 - Export the HW config in the 5.4 and import it in the 5.3. 2 - Export / Import the simble table. 3- Generate source files of all blocks in the lad editor of the 5.4, export as txt file (awl) in the 5.4 and import / compile it in the 5.3. 4 - Copy by hand connections and global data (if necessary).
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

8/2/2007 5:58 AM	Rate (0)
usjwo Posts: 36 Rating: (9)	Thanks a lot!! I had only a few blocks. I did it according item 3, and works! Usjwo
usjwo Posts: 36 Rating: (9)
Suggestion To thank Quote Answer

8/2/2007 5:29 PM	Rate (0)
Denilson Pegaia Platinum Member Joined: 9/23/2005 Last visit: 5/26/2023 Posts: 4184 Rating: (1341)	It's a pleasure to help you
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on