Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Bar Limits

Created by: BenB at: 7/23/2013 7:39 PM (4 Replies)

Rating (0)

Thanks 2

5 Entries

7/23/2013 7:39 PM	Rate (0)
BenB Advanced Member Joined: 3/5/2013 Last visit: 7/25/2024 Posts: 21 Rating: (0)	Hello, I am using the Bar element using TIA V12 Portal and a KP400 HMI. I have set the bar up with my process tag and I would like to be able to use the High and Low limits that are selectable in the Bar properties. However, I cannot find where you set the limits. I would like to be able to set these with tags. Is this possible? How are the limits used if this isn't possible? Thanks, BenB

Suggestion To thank Quote Answer

7/23/2013 8:17 PM	Rate (0)
adam_ski Bronze Member Joined: 4/9/2010 Last visit: 12/20/2024 Posts: 228 Rating: (33)	Hi, I believe these limits are set by "Range" of you process tag and you can set them there as constant or tag. A.

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users lgonzalez@ingenie...

7/23/2013 8:45 PM	Rate (0)
BenB Advanced Member Joined: 3/5/2013 Last visit: 7/25/2024 Posts: 21 Rating: (0)	Thank you very much. I think this is going to work great.

Suggestion To thank Quote Answer

8/11/2013 10:44 PM	Rate (0)
vroy Advanced Member Joined: 1/24/2008 Last visit: 6/21/2024 Posts: 6 Rating: (0)	adam_ski Hi, I believe these limits are set by "Range" of you process tag and you can set them there as constant or tag. A. I´m looking for the same thing but can´t solve it. I think it´s a difference between range and limits. As I understand range is about maximum and minimum value and limits is for high, highhigh, low and lowlow alarms. In earlier WinCC flexible versions it was a separate property for limits at the bar object letting the user set four values either static or dynamic via tags. In V12 this property is missing at the bar object.

Suggestion To thank Quote Answer

8/30/2013 1:42 PM	Rate (0)
Tweety Posts: 3037 Rating: (192)	Hello, Can you do a screenshot what do you missing in TIA Portal? Tweety
Tweety Posts: 3037 Rating: (192)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Mayrhofer B.

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Adv Picture Controls

Follow us on