Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

BF/SF leds on

Created by: engineeeer at: 2/5/2020 8:06 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

2/5/2020 8:06 PM	Rate (0)
engineeeer Advanced Member Joined: 1/4/2019 Last visit: 3/15/2023 Posts: 57 Rating: (0)	Hello every body. i need your urgent help , i have cpu s7-318-2 connected to it 4 IM 151-1 and 2 festo modules cp fb-13 and 1 heating unit HS 724 and one IM 153-2 redundant module and 2 simodrives . all give blinking BF 1 HZ and continuous SF led for all except heating module and one fesro module some times works and sometimes don't, i tried every thing all cables have no short circuit no cuts and the shield is ok . i checked pin 3 and 8 for each socket and all were good , when i make online connection through profibus it can recognize every module but it is not available "configured and inserted modules mismatch" so please help in this problem because it drive me crazy . i send you a screen shot of online configuration and diagnostic messages Attachment Capture 1 (2).JPG (35 Downloads)

Suggestion To thank Quote Answer

2/6/2020 1:14 AM	Rate (0)
Hati Platinum Member Joined: 9/21/2012 Last visit: 6/10/2023 Posts: 3722 Rating: (419)	Go to the PLC's diagnostics buffer, to find out what is happening.

Suggestion To thank Quote Answer

2/7/2020 8:51 AM	Rate (0)
engineeeer Advanced Member Joined: 1/4/2019 Last visit: 3/15/2023 Posts: 57 Rating: (0)	i had solve the problem in all , i found the defected modules in every station and reconfigure it again and the problem is solved thank allah except in one one festo fb-13 module i do not know how to configure it again , i think it had a special software from festo itself can anybody help

Suggestion To thank Quote Answer

2/8/2020 5:46 PM	Rate (0)
engineeeer Advanced Member Joined: 1/4/2019 Last visit: 3/15/2023 Posts: 57 Rating: (0)	No answer

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on