Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Bitwise and in dynamic dialog

Created by: waterguy at: 3/22/2007 1:37 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

3/22/2007 1:37 PM	Rate (0)
waterguy Posts: 16 Rating: (0)	Hi, I'm tring to do a bitwiseANDalong with a checking the status of a bit in a dynamic dialog as follows. '.REMOTE' && (('.GRAYOUT' & 0x20) == 0) the switch is in remote and it is not grayed out (it is enabled) It seems like I can't do a bitwise AND in WinCC version 6.0 other than to use the Bit radio button. Is this true? Thanks
waterguy Posts: 16 Rating: (0)	Last edited by: waterguy at: 22.03.2007 13:55
Suggestion To thank Quote Answer

3/22/2007 3:55 PM	Rate (0)
Nemo Posts: 3149 Rating: (171)	Hi I think this issue has already been discussed please search for "WinCC bit" /tf/WW/en/Posts/8124 nemo
Nemo Posts: 3149 Rating: (171)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on