5/9/2012 11:49 AM | |
Joined: 8/27/2006 Last visit: 4/23/2024 Posts: 719 Rating: (88) |
In that case, I would Reinstall Windows |
The more you know, The more you know that you don't know |
|
5/9/2012 11:50 AM | |
Joined: 4/24/2006 Last visit: 4/26/2024 Posts: 8616 Rating: (1147) |
Hello algudkar, Perhaps this link might help: how do you clear message 256:26 "An OLE error has occurred"? Best regards, Wizard |
5/9/2012 12:35 PM | |
Posts: 621 Rating: (10) |
Hi wizard thank you for the rply i will try it! regards algudkar |
5/9/2012 6:25 PM | |
Posts: 557 Rating: (64) |
Hello, we can use online tool for checking purpose. see the link. https://support.automation.siemens.com/kompatool/pages/main/interim.jsf |
5/10/2012 7:19 AM | |
Posts: 621 Rating: (10) |
Hi wizard / friends icome back with you once again. exactly what you above mentioned OLE error 256:26. as per you given the link i was go through that and tryed to clear the error also.but same thing is there and un installed the software and again same version V5.4 SP5 software installed.nothing changed here i attached 2 photo snaps. the 2 snap is the same project i copied in the external disk.and trying to open the project.but now that popup which is in 2nd snap if i closed or click on ok the complete simatic manager window automatically closed. my friends are suggesting me that formate the PC and re installed the software.but i cont do this.because this is main server pc.in the customer site friends can you help me.... regards algudkar Attachmentscreens.zip (91 Downloads) |
5/10/2012 12:57 PM | |
Posts: 2348 Rating: (263)
|
And can you upload project here? Also - what language you used for writing blocks? If it was SCL you can just open files as txt in /s7asrcom folder. |
5/10/2012 1:24 PM | |
Joined: 3/21/2006 Last visit: 4/25/2024 Posts: 10228 Rating: (1181) |
Hello, 1. Can you create and open after a new project? 2. Version of WInCC is... 3. Copy that project ot local hard disk and try it to open from there. 4. In case of need to reinstall the Simatic Manager in order to jump format: procedure -How do you uninstall STEP 7 completely, including all the software packages? Best regards, Hristo Mihalev
|
5/10/2012 5:12 PM | |
Posts: 621 Rating: (10) |
Hi umencho 1 yes i created new project 2 Version of Wincc flexible is sp2 3 yes i cpyed the same project of local hard disk and i was tryed to open 4 procedure also already linked mr darious these are all above i tryed but now facing the second snap which was i attached in this topic |