Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Breaking resistor with G120X

Created by: NitinShah at: 10/23/2019 3:07 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

10/23/2019 3:07 PM	Rate (0)
NitinShah Posts: 1 Rating: (0)	Can I connect breaking resistor to a G120X drives?
NitinShah Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

10/23/2019 3:12 PM	Rate (0)
RB91 Gold Member Joined: 4/28/2015 Last visit: 10/22/2024 Posts: 1278 Rating: (301)	Changed: Don't want to tell something wrong...as Miami says I think it is not intended for that case.
	Last edited by: RB91 at: 10/24/2019 08:10:04 Best regards, Robert
Suggestion To thank Quote Answer

10/23/2019 6:17 PM	Rate (0)
miami Platinum Member Joined: 8/31/2005 Last visit: 11/13/2024 Posts: 2198 Rating: (330)	I think it's not possible. I found no information on a brake/pulse resistor in the manual (https://support.industry.siemens.com/cs/ww/en/view/109769350) The delivery release (https://support.industry.siemens.com/cs/ww/en/view/109763582) says: The G120X is an infrastructure drive optimized for pump/fan applications and is specialized for the water/waste water (W/WW) industries and building management systems (HVAC). (Most) pump and fan applications do not require (active) braking...

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_G

Follow us on