Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Bubble-Help Bug in S7 V5.5

Created by: IBN-Service at: 8/20/2011 10:25 AM (1 Replies)

Rating (1)

Thanks 0

2 Entries

8/20/2011 10:25 AM	Rate (0)
IBN-Service Posts: 8946 Rating: (999)	Dear friends, I found (testet on several computers) a bug concerning the "bubble help / Tooltip help" in S7 V5.5. Very often, the help does not show the type and format of an local or static variable or parameterinside a FC/FB. In V5.4, you can see name, format, type and comment of the operand that was located under mouse curser. Now, this help is not complete anymore. Most time, you must check the operand in the declaration table to find out, if it is an IN, OUT, INOUT and wich format it is. I do not have install SP1 onto my professional version V5.5. Does anybody can test, if this bug is stillpresent in SP1? Thank you and have a nice weekend, J. Müller IBN-Service.
IBN-Service Posts: 8946 Rating: (999)
Suggestion To thank Quote Answer

11/9/2011 10:40 AM	Rate (1)
IBN-Service Posts: 8946 Rating: (999)	Problem seems to be fixed with SP1 / SR1 of Step7 Professional V5.5: http://support.automation.siemens.com/WW/view/en/52336670
IBN-Service Posts: 8946 Rating: (999)	Last edited by: IBN-Service at: 11/9/2011 10:40 AM
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on