Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

BUSF led on the front of the CP342-5 flash so could you show me the way to trouble this problem?

Created by: Applications & Tools at: 10/24/2009 8:37 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

10/24/2009 8:37 PM	Rate (0)
Applications & Tools Posts: 1 Rating: (0)	Dear Tleb! My CP342-5 had been working without problem for 5 years as SLAVE, but now the BUSF led on the front of the CP342-5 flash so could you show me the way to trouble this problem? Thanks! my email : haiau10000@yahoo.com
Applications & Tools Posts: 1 Rating: (0)	Last edited by: O_Moderator at: 10/26/2009 9:31 AM new subject after splitting
Suggestion To thank Quote Answer

10/26/2009 7:20 AM	Rate (0)
UMENCHO Diamond Expert Joined: 3/21/2006 Last visit: 10/7/2024 Posts: 10229 Rating: (1181)	Hello, Have you been changed something in hardware configuration recently? If not, you could start with hardware check of Profibus cable and connectors on both sides - CP and its Profibus partner. Regards, Hristo Mihalev

Suggestion To thank Quote Answer

10/26/2009 10:30 AM	Rate (0)
Hulzhex Gold Member Joined: 8/25/2005 Last visit: 10/5/2024 Posts: 1162 Rating: (111)	Hello Applications & Tools, have a look at the Diagnostic of the CP. There you will find informations about the communication with the master (Diagnostic-Buffer and DP-Slave Diagnostic) What's about the status of the FC's? Best regards Sabine

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on