Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Button, Switch

Created by: JoKuhl at: 5/23/2008 8:43 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

5/23/2008 8:43 AM	Rate (0)
JoKuhl Experienced Member Joined: 10/3/2007 Last visit: 2/10/2022 Posts: 43 Rating: (0)	Hi everybody, My brain seems to be twisted the last two days, and I can't figure out how to use a button in WinCC 6.0 as switch. The help says a button has two states ON and OFF, so there is the Switch, but what toggles the two states. I can write a VBScript to toggle an intern tag, but thats like shoting with big guns on small birds. Any suggestions? //Johannes

Suggestion To thank Quote Answer

5/23/2008 2:11 PM	Rate (0)
billwest Posts: 510 Rating: (117)	The WinCC Graphics Library has Toggle Buttons, Global Library >Operation> Toggle Buttons. Tag Assignment in the Properties tab is where you connect the tag. Bill
billwest Posts: 510 Rating: (117)
Suggestion To thank Quote Answer

5/23/2008 9:26 PM	Rate (0)
JoKuhl Experienced Member Joined: 10/3/2007 Last visit: 2/10/2022 Posts: 43 Rating: (0)	Thx, I will try it tomorrow, that will be a great help. greetings Johannes

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on