Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

BW500 Chain Calibration P017 Value

Created by: Remstar22 at: 11/29/2019 3:14 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

11/29/2019 3:14 PM	Rate (0)
Remstar22 Posts: 2 Rating: (0)	Hi guys, If we have 1 load cell bridge and our calibration chain is 20kg/m. Our distance between the idlers is 1,2 meter. Chain lenght = 5 meters (we are covering 2 idlers on each side) What should be the value in the parameter P017? I'm supposing 20, but we have some discussion about that here onsite and we would like to be sure. Regards,
Remstar22 Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

11/29/2019 4:20 PM	Rate (0)
Siwarexi Gold Expert Joined: 1/4/2007 Last visit: 1/3/2025 Posts: 1170 Rating: (175)	Hello Remstar22, You have to set the parameter P017 in “kg/m”. In your case, it’s 20 kg/m. Best regards Siwarexi

Suggestion To thank Quote Answer

11/29/2019 4:24 PM	Rate (0)
Remstar22 Posts: 2 Rating: (0)	Thanks Siwarexi!
Remstar22 Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on