Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Bypass function with CU230P

Created by: Tractor at: 8/27/2014 5:08 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

8/27/2014 5:08 PM	Rate (0)
Tractor Gold Expert Joined: 3/27/2008 Last visit: 12/7/2023 Posts: 1041 Rating: (127)	I have a CU230P control unit FW 4.4. K1 and K2 contrctors have a 'monitor', where the operation of these contactors is connected to DIN1 for K1, and DIN2 for K2. To complete this I have set: P1269:0 = 722:0 P1269:1 = 722:0 Using this method I get F7311, feedback signal missing. If I reset P1269 as below, the bypass functions, but I am not now usinf the checkback function? P1269:0 = 1261:0 P1269:1 = 1261:1
	Last edited by: tractor at: 8/29/2014 10:49 AM Tractor
Suggestion To thank Quote Answer

8/29/2014 10:51 AM	Rate (0)
Tractor Gold Expert Joined: 3/27/2008 Last visit: 12/7/2023 Posts: 1041 Rating: (127)	CU now replaced with V4.6, and the contactor 'checkback' to the digital inputs functions correctly.
	Tractor
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_G

Follow us on