Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

C script??

Created by: matwon at: 12/2/2013 6:44 PM (5 Replies)

Rating (0)

Thanks 1

6 Entries

12/2/2013 6:44 PM	Rate (0)
matwon Experienced Member Joined: 5/24/2012 Last visit: 8/4/2023 Posts: 69 Rating: (0)	Are scripts in C supported in v12? If so, I can't seem to find a way to create one... I can only add a VBS script in the scripts tab. Thanks

Suggestion To thank Quote Answer

12/3/2013 8:51 AM	Rate (0)
K!ke Posts: 1299 Rating: (135)	Hello, you can use c-scripts for wincc runtime professional. you can add these in project tree > RT Pofessional > Scripts > C scripts > Add new C function. K!ke
K!ke Posts: 1299 Rating: (135)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Tomy Master

12/3/2013 4:53 PM	Rate (0)
matwon Experienced Member Joined: 5/24/2012 Last visit: 8/4/2023 Posts: 69 Rating: (0)	Ok thanks, that's what I thought.. I just found something that said that C scripts are only availabe on RT Professional. The client bought a advanced RT liscence. I found my way around coding a VB script instead! thanks again!

Suggestion To thank Quote Answer

12/3/2013 7:59 PM	Rate (0)
Darius Platinum Expert Joined: 9/28/2005 Last visit: 8/22/2023 Posts: 2957 Rating: (242)	Hi, It does not depent if you have RT or RC regarding script support. The most important part is TIA WinCC version. Please just remember that WinCC TIA Advanced is same as previous WinCC Flex Advanced and it is HMI software. It supports VBS scripts. The new TIA WinCC Pro is SCADA system, same as good old WinCC and it supports both C and VBS. So don't mix between these two. HMIs does not support C script, only VBS.
	Best regards, Darius
Suggestion To thank Quote Answer

12/9/2013 5:40 PM	Rate (0)
matwon Experienced Member Joined: 5/24/2012 Last visit: 8/4/2023 Posts: 69 Rating: (0)	Darius Hi, It does not depent if you have RT or RC regarding script support. The most important part is TIA WinCC version. Please just remember that WinCC TIA Advanced is same as previous WinCC Flex Advanced and it is HMI software. It supports VBS scripts. The new TIA WinCC Pro is SCADA system, same as good old WinCC and it supports both C and VBS. So don't mix between these two. HMIs does not support C script, only VBS. Noted, thanks Darius

Suggestion To thank Quote Answer

1/28/2020 10:18 AM	Rate (0)
Jen_Moderator Moderator Joined: 6/19/2017 Last visit: 9/22/2023 Posts: 7305 Rating: (143)	New question published by Hti_automation is split to a separate thread with the subject How to create a line in space with different points?. Best regards Jen_Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards Jen_Moderator
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Prof System functions/Scripting

Follow us on