C310-P2N in Tia 15.1 - how to make the config?

Hello

I have to use the C310-P2N in Tia 15.1. Does anyone have an example how to make the config? or have an example program for me ?

b.r.

Victor

------------------------------------------------------------------------------------------
Split from CU310-2PN and TIA V15.1.

Hello,

with CU310-2 you need to use the GSDML file of the drive for the Hardware Config in TIA Portal. You will find this file in the hardware catalogue under "other field devices -> PROFINET -> drives …". So take this file and connect it to your PLC. Give the correct IP address and PROFINET device name. Also add the telegram you need to the GSDML file in the "device view" of it.

The drive itself is commissioned with the tool STARTER. Here you also set up the telegram which you want for the communication to the PLC.

Depending on your application you could use the simple telegram 1 for speed controlled drive or telegram 111 for positioning with basic positioner (drive based positioning) or telegram 105 for the usage of the drive at a technology object of the PLC.