Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

C7 -635 download PLC and HMI?

Created by: Tom_Li at: 6/23/2008 12:13 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

6/23/2008 12:13 PM	Rate (0)
Tom_Li Posts: 72 Rating: (0)	Dear Sir, Now this is the first time I use C7. 1.I 've download HMI with protool by serial port and done it. 2. but I don't know how the communication the PLC and the OP? 3.How I down load the PLC program ( I use MPI and step7 and I can find the C7 address). 4. When in the using, how the C7 working?do the C7 have to connect any other PLC when I see that" no connection AS 2#"?
Tom_Li Posts: 72 Rating: (0)
Suggestion To thank

6/23/2008 3:50 PM	Rate (0)
CS Moderator Moderator Joined: 9/1/2005 Last visit: 2/27/2023 Posts: 4097 Rating: (192)	closed cause question posted twice. The second thread with the subject How the HMI( protoo) connect PLC(step7) in C7-635? is published within the conference SIMATIC ProTool / ProTool/Pro. Best regards CS Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards CS Moderator
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on