Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

cable connection for 820 sinumerik system

Created by: Nanu_333 at: 12/2/2011 6:02 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

12/2/2011 6:02 AM	Rate (0)
Nanu_333 Bronze Member Joined: 5/19/2011 Last visit: 1/20/2023 Posts: 196 Rating: (5)	Plz let me know whether following cable connection for sinumerik 820 system is correct or wrong? 9pin(PG) to 25 pin(CNC) 2-----------------2 3-----------------3 5-----------------7. If not plz give me the correct pin connection.

Suggestion To thank Quote Answer

12/2/2011 9:38 AM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 3/2/2023 Posts: 10221 Rating: (1175)	Sinumeric controller CNC data uplaod/download Best regards, Hristo Mihalev

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on