Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

cable type

Created by: Attia at: 10/1/2014 6:46 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

10/1/2014 6:46 PM	Rate (0)
Attia Posts: 37 Rating: (0)	what type cable used for connect from pc to logo plc & i needassembly wire connected
Attia Posts: 37 Rating: (0)
Suggestion To thank Quote Answer

10/1/2014 9:06 PM	Rate (0)
Toeternietoe Platinum Member Joined: 12/27/2006 Last visit: 11/29/2024 Posts: 1197 Rating: (113)	Which type of LOGO! ? to OBA6 there is onley a special cable from Siemens. OBA7 and OBA8 uses a standard Ethernet cable (cat 5)

Suggestion To thank Quote Answer

10/2/2014 9:26 AM	Rate (0)
Attia Posts: 37 Rating: (0)	typeOBA6
Attia Posts: 37 Rating: (0)
Suggestion To thank Quote Answer

10/2/2014 9:33 AM	Rate (0)
Marcjan Platinum Member Joined: 4/22/2010 Last visit: 11/18/2024 Posts: 5697 Rating: (715)	Hello, there are 2 type of progamming cables to program the 0BA6 or lower versions: 6ED1057-1AA01-0BA0 LOGO! USB PC-CABLE F. PROGRAM TRANSMITT. and 6ED1057-1AA00-0BA0 LOGO! PC CABLE, RS232 Regards, Marcjan
	Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on