Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Calibrating of a Siwarex CS on OP77B panel possible ?

Created by: Rosegarden at: 7/11/2012 10:12 AM (6 Replies)

Rating (0)

Thanks 1

7 Entries

7/11/2012 10:12 AM	Rate (0)
Rosegarden Posts: 63 Rating: (0)	Hello, at our plant we have an crane which has an weighting faccility working with a Siwarex CS measurement. Because we want to check and if nessesary calibrate the module we have to go inside the bunker on the crane. We wonder if this can be done from inside the cranecontainer, where also a OP77B panel is located. I wonder if it's possible to get calibateprocedure (zero/span) can be programmed in the PLC and then using the OP77B panel for calibrating the CS module. Thanks for any feedback. Reagrds.
Rosegarden Posts: 63 Rating: (0)
Suggestion To thank Quote Answer

7/11/2012 11:30 AM	Rate (0)
Wizard Diamond Member Joined: 4/24/2006 Last visit: 9/29/2023 Posts: 8593 Rating: (1132)	Hello Rosegarden, Have you seen this link: Getting Started S7 Project for SIWAREX CS (Step 7 Classic and TIA-Portal) Perhaps it might help. Best regards, Wizard

Suggestion To thank Quote Answer

7/11/2012 3:07 PM	Rate (0)
Rosegarden Posts: 63 Rating: (0)	Hello Wizard, thanks for the feedback about the sampleproject. At out plant we have Step7 v5.4, no TIA v11. If I download the Step 7 version of the sampleproject, I can't open it in the Simatic Manager. I use the retrieve funtion whithin the Simatic Manager. Do you have tips ? Where can I find the hardwareprifile (hardware library) for the Siwarex CS module ? Regards, Rosegarden
Rosegarden Posts: 63 Rating: (0)	Last edited by: Rosegarden at: 7/11/2012 3:40 PM
Suggestion To thank Quote Answer

7/11/2012 3:26 PM	Rate (0)
Wizard Diamond Member Joined: 4/24/2006 Last visit: 9/29/2023 Posts: 8593 Rating: (1132)	Hello, When you have used Retrieve in Step 7 v5.4, there is no project opened. There will be a directory generated called: Getting_Started_CS. Here you will find another zip file (with the project) and a pdf with information. Hope this will help. Best regards, Wizard

Suggestion To thank Quote Answer

7/11/2012 3:48 PM	Rate (0)
Rosegarden Posts: 63 Rating: (0)	Yes indeed Wizard, thanksfor thetip:) I was overlooked the ZIP file, there is a ZIP file within the first one, this is the project. I can open it without finely in the Simatic Manager. Although I wonder where I can find the Hardware module in the Library. It is in the configuration but it isn't in the HW library. I downloaded the latetst library but still it seems not be part of it.
Rosegarden Posts: 63 Rating: (0)
Suggestion To thank Quote Answer

7/11/2012 4:04 PM	Rate (0)
Wizard Diamond Member Joined: 4/24/2006 Last visit: 9/29/2023 Posts: 8593 Rating: (1132)	Hello Rosegarden, Well you can find it in Catalog. Go to Profibus DP (or Profinet) go to ET200S select the right IM station Then go to FM and here you should find Siwarex module. Best regards, Wizard

Suggestion To thank Quote Answer

7/12/2012 8:18 AM	Rate (0)
Rosegarden Posts: 63 Rating: (0)	Yes Wizard ! The module is in de Profibus DP folder, I was looking in the Simatic 300/FM folder. Thanks you verry much.
Rosegarden Posts: 63 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Wizard

|

Share this page:

Share this page on...

Follow us on