Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

calibration of siwarex cf module of ET200S

Created by: rabi at: 11/24/2014 11:54 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

11/24/2014 11:54 AM	Rate (0)
rabi Posts: 49 Rating: (0)	Dear all How can i calibrate the SIWAREX CF module ? Actually Im very new to this module. Can any one help me on this?
rabi Posts: 49 Rating: (0)
Suggestion To thank Quote Answer

12/1/2014 9:56 AM	Rate (0)
Siwarexi Gold Expert Joined: 1/4/2007 Last visit: 12/2/2024 Posts: 1152 Rating: (175)	Hello rabi, It is not possible to do a calibration with the Siwarex CF module. You receive only the digit values to the PLC. With the Siwarex CS module it is possible to do a calibration. Best regards Siwarexi

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on