Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Can connect but nothing more?

Created by: JeeyBee at: 5/28/2019 5:47 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

5/28/2019 5:47 PM	Rate (0)
JeeyBee Posts: 5 Rating: (0)	I´m trying to program an 6ED1052-2CC08-0BA0 with Logo soft 8.0 but it wont work, can it be that I need 8.1? Connection seem to be fine, green ok and all, see attached picture. But when I try to download, run, stop, online test then nothing happends, no error message or anything. PC IP = 192.168.0.1 LOGO IP = 192.168.0.3 Attachment Capture.PNG (29 Downloads)
JeeyBee Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

5/28/2019 5:51 PM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 12/11/2023 Posts: 31595 Rating: (3928)	Yes, minimum is LSC V8.1. if you want to use the extended web server in this LOGO!8.2, you need LSC V8.2. Download all from the link that I posted in your topic before. How to update from 8.0 to 8.1? The LOGO!8.2 is in the Hardware selection a LOGO!8.FS4.
	Last edited by: ixo65 at: 05/28/2019 17:56:23
Suggestion To thank Quote Answer

5/28/2019 5:51 PM	Rate (0)
Toeternietoe Platinum Member Joined: 12/27/2006 Last visit: 11/27/2023 Posts: 1192 Rating: (112)	You need LOGOSoft version 8.2 Download is for free (if you have already a full version) https://support.industry.siemens.com/cs/ww/en/view/109767413
	Last edited by: Toeternietoe at: 05/28/2019 17:53:38 Last edited by: Jen_Moderator at: 05/29/2019 11:01:43 Optimized link.
Suggestion To thank Quote Answer

5/28/2019 6:01 PM	Rate (0)
JeeyBee Posts: 5 Rating: (0)	Ok thanks alot.
JeeyBee Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on