Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Can I connect HMI Mitsubishi ( E 1100 ) with s71200?

Created by: tdhieuqn at: 2/19/2012 9:09 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

2/19/2012 9:09 AM	Rate (0)
tdhieuqn Posts: 4 Rating: (0)	Hi expert , I am using HMI Mitsubishi ( E 1100 ) , It has a RJ45 port . Can I connect it with s71200 ? Please help me about this problem .
tdhieuqn Posts: 4 Rating: (0)	Last edited by: O_Moderator at: 2/20/2012 12:10 PM new subject after splitting from /tf/WW/en/Posts/62785#top
Suggestion To thank

2/20/2012 8:32 AM	Rate (0)
Marcjan Platinum Member Joined: 4/22/2010 Last visit: 12/15/2022 Posts: 5697 Rating: (701)	Hello, Only if the Mitsubushi HMI has S7 drivers, for that you have to read the Mitsubushi documentation. Regards, Marcjan
	Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank

2/20/2012 9:40 AM	Rate (0)
tdhieuqn Posts: 4 Rating: (0)	Hi expert , I have read doccument of E1100 . I use E-designer Software to program E1100 . E1100 support driver " S7 ISO over TCP/IP " . Can I use this driver connect s71200 ?
tdhieuqn Posts: 4 Rating: (0)
Suggestion To thank

2/20/2012 12:11 PM	Rate (0)
O_Moderator Diamond Member Joined: 4/24/2009 Last visit: 2/6/2023 Posts: 2685 Rating: (135)	Thread closed, because question is already discussed in the folllowing thread Communicating with HMI Other non siemens Best regards O_Moderator
	Tips&Tricks for the forum usage
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on