Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Can I set in any Timer block (TON ets) defoult time like minute (NOT ms - milisecond)?

Created by: Bill1777 at: 2/24/2012 8:32 PM (4 Replies)

Rating (0)

Thanks 0

5 Entries

2/24/2012 8:32 PM	Rate (0)
Bill1777 Bronze Member Joined: 4/30/2011 Last visit: 1/9/2022 Posts: 223 Rating: (4)	Can I set in any Timer block (TON ets) defoult time like minute (NOT ms - milisecond)? becouse ET (TON block) in ms is very uncomfortable for me...

Suggestion To thank Quote Answer

2/24/2012 9:38 PM	Rate (0)
0_Einstein Diamond Expert Joined: 7/7/2010 Last visit: 12/23/2024 Posts: 15531 Rating: (2462)	If you want it to be 5 seconds, type 5s and it will be 5 seconds :) If you want it to be 5 minutes, if you try 5m, I think you will be shocked at what it does! Well, after the 5s comment, maybe not! I went up s, h, m, d and thought that was far enough!
	science guy
Suggestion To thank Quote Answer

2/24/2012 9:53 PM	Rate (0)
Bill1777 Bronze Member Joined: 4/30/2011 Last visit: 1/9/2022 Posts: 223 Rating: (4)	NO Nobody cant type in ET!!!! ? ET autogenereted output!!!!!!!!!!!!

Suggestion To thank Quote Answer

2/24/2012 9:55 PM	Rate (0)
0_Einstein Diamond Expert Joined: 7/7/2010 Last visit: 12/23/2024 Posts: 15531 Rating: (2462)	Oh, you meant the elasped time value. Just convert it to seconds using a convert blockand never look at the ET in ms again.
	science guy
Suggestion To thank Quote Answer

2/25/2012 6:27 PM	Rate (0)
Ganes10 Platinum Member Joined: 8/31/2010 Last visit: 1/9/2025 Posts: 1523 Rating: (230)	AndyNeva Can I set in any Timer block (TON ets) defoult time like minute (NOT ms - milisecond)? becouse ET (TON block) in ms is very uncomfortable for me... Hello AndyNeva, What is the data type of the tag you mention at ET? You try with a Time Data Type tag and it should do for you.
	Like it? Rate it!
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on