Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Can I use two dual-head Matrox cards instead of one quad-head card

Created by: TSC at: 8/18/2009 11:52 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

8/18/2009 11:52 AM	Rate (0)
TSC Posts: 37 Rating: (4)	According to the Matrox website, two dual-head cards should work, however, this has not been tested with PCS 7, and therefore, it is not supported.
TSC Posts: 37 Rating: (4)
Suggestion To thank Quote Answer

8/19/2009 4:07 PM	Rate (0)
huevon Posts: 7 Rating: (0)	I have used this recently, both situations, clients with a quadhead card, en clients with 2 dualhead cards from Matrox, and it works without any problem. For those who want to set up 4 screens for wincc, do not forget to make sure the startbutton of windows is on the upperleft screen, otherwise visualisation on the 2 screens below don't work. (i don't know if this is always like this, but it was in my case.)
huevon Posts: 7 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on