Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

can not upload with from S7-1200

Created by: ronny.dp at: 9/15/2014 8:54 AM (2 Replies)

Rating (1)

Thanks 1

3 Entries

9/15/2014 8:54 AM	Rate (0)
ronny.dp Posts: 28 Rating: (0)	Hi all, I need to upload an S7-1200 project, I have tried with TIA pro V13, V12 and V11 but each with a simular error stating I can not upload the project because it was downloaded with V10.5. Is there any way to resolve this without somehow getting V10.5 ? ( i haven't found any trial download for 10.5 ) Ronny.
ronny.dp Posts: 28 Rating: (0)
Suggestion To thank Quote Answer

9/15/2014 9:16 AM	Rate (0)
Wizard Diamond Member Joined: 4/24/2006 Last visit: 1/24/2025 Posts: 8808 Rating: (1177)	Hello ronny.dp, Perhaps the following thread may help: how upload a S7-1200 program in STEP 7 V11 SP2 Best regards, Wizard

Suggestion To thank Quote Answer

9/15/2014 9:36 AM	Rate (1)
Ganes10 Platinum Member Joined: 8/31/2010 Last visit: 1/24/2025 Posts: 1523 Rating: (230)	ronny.dp Hi all, I need to upload an S7-1200 project, I have tried with TIA pro V13, V12 and V11 but each with a simular error stating I can not upload the project because it was downloaded with V10.5. Is there any way to resolve this without somehow getting V10.5 ? ( i haven't found any trial download for 10.5 ) Ronny. Hello ronny.dp, As rightly said by TIA Portal, a program downloaded using v10.5 can only be uploaded using v10.5 There is no way to get rid of this. Alternatively if at all the project backup of TIA Portal v10.5 is available, you can upgrade it with v11 or higher. (This upgrade of project happens automatically when the v10.5 project is opened in a latest version other than 10.5, as there is no special option to upgrade such projects)
	Like it? Rate it!
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users VVago

|

Share this page:

Share this page on...

Follow us on