Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Can SinuCom NC Trace be started by NC program?

Created by: mwmb2 at: 1/24/2008 8:59 AM (2 Replies)

Rating (1)

Thanks 0

3 Entries

1/24/2008 8:59 AM	Rate (0)
mwmb2 Posts: 8 Rating: (0)	Hi All, By now, i must press the start button of NC Trace to start it, and data will be recorded after the trigger is trigged. Is there a NC command to start NC Trace in NC program instead of pressing start button? BR mwmb2
mwmb2 Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

1/25/2008 10:37 PM	Rate (1)
Pee Ell Sea Posts: 672 Rating: (57)	Hi, It would be a sensible function. I work with a 10 second cycle time which sometimes faults out so I would run the function on the HMI for every component either from the NC program or the plc. I've asked Siemens a number of times but nobody has provided an answer. I don't think it's possible.
Pee Ell Sea Posts: 672 Rating: (57)
Suggestion To thank Quote Answer

1/29/2008 3:34 AM	Rate (0)
mwmb2 Posts: 8 Rating: (0)	Hi Pee EII Sea, thanks for your explanation. After seveval trying, I don't think it's possible either. BR mwmb2
mwmb2 Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on