hi,

i can't change the parametre p251 to 0 after change the fan, i have alarme for level acces, how i can change the level, for info i work with simotion scout

------------------------------------------------------------------------------------------
Split from S120 - A00342 Fan Has Reached Max Operating Hours .

electrikman

hi,

i can't change the parametre p251 to 0 after change the fan, i have alarme for level acces, how i can change the level, for info i work with simotion scout

 Hello,

To change p251 access level required is 3 i.e. P003 must be set to 3 & drive should be ready i.e. should not in run state or under commissioning mode.

Please change p003 = 3 & check.

HTH

dear's,

it s ok think's for all