Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Can't find right hardware type in LOGO!Soft Comfort

Created by: elschr at: 6/20/2019 3:32 PM (4 Replies)

Rating (2)

Thanks 0

5 Entries

6/20/2019 3:32 PM	Rate (0)
elschr Posts: 15 Rating: (0)	Hi, I am working with a 6ED1052-2CC08-0BA0 LOGO (8DI whose 4AI 0...10V). When I connect my LOGO! module to the laptop which is running LOGO!Soft comfort 8.2, I can test network connection and it's ok. But when I want to create logical diagram, I need to specify hardware type so that I can access correct function blocks etc... But when I choose the hardware type (I chose 0BA0.Standard) it shows that there are 6 digital inputs but module has 8. Do you have any idea? Thanks
elschr Posts: 15 Rating: (0)
Suggestion To thank Quote Answer

6/20/2019 3:37 PM	Rate (2)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 12/5/2023 Posts: 31546 Rating: (3920)	Siemens has changed the order numbers. Your LOGO! with the order number 6ED1052-2CC08-0BA0 is not 0BA0 in the device selection, but a LOGO! 8.FS4.

Suggestion To thank Quote Answer

6/20/2019 3:39 PM	Rate (0)
elschr Posts: 15 Rating: (0)	Thanks I didn't notice that Best regards
elschr Posts: 15 Rating: (0)
Suggestion To thank Quote Answer

6/20/2019 3:41 PM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 12/5/2023 Posts: 31546 Rating: (3920)	Hello elschr, you're welcome ...

Suggestion To thank Quote Answer

9/22/2020 2:09 PM
AV1234 Member Joined: 9/12/2020 Last visit: 4/19/2023 Posts: 21 Rating: (0)	.
	Last edited by: AV1234 at: 09/22/2020 14:11:47
Suggestion Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on