Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Can't see the online values 0BA7

Created by: Rescobedo at: 6/3/2014 10:21 PM (5 Replies)

Rating (1)

Thanks 2

6 Entries

6/3/2014 10:21 PM	Rate (0)
Rescobedo Silver Member Joined: 11/5/2012 Last visit: 10/24/2023 Posts: 486 Rating: (63)	Hello all. I have this issue: when i connect to the LOGO! and try to see the program online, it doesn't show the actual value of the analog inputs, and outputs. But I can see the actual values in the LOGO! 0BA7 screen. What could be the cause of this problem? Because the first time that I tried that,toseethe online values,I was able to see the actual value of the analog inputs and outputs. Then, a few days after, I tried again and now the program doesn't show the actual value of the analog I/O. Thanks for the help.

Suggestion To thank Quote Answer

6/3/2014 10:28 PM	Rate (0)
William_B Posts: 5225 Rating: (1182)	Please can you make a full screen capture of your experience so we might have something visual to work with. w
William_B Posts: 5225 Rating: (1182)
Suggestion To thank Quote Answer

6/4/2014 8:43 AM	Rate (1)
Helmut_13 Posts: 2930 Rating: (432)	Hi, to only start the online test is not enough. You also need to start communication by click on the glasses. In addition each FB has glasses to activate it. I'm not sure if you can directly see the value oa AI and AQ. If not, then use Analog Amplifier and its glases. Hope this helps
Helmut_13 Posts: 2930 Rating: (432)
Suggestion To thank Quote Answer

6/5/2014 10:36 PM	Rate (0)
Rescobedo Silver Member Joined: 11/5/2012 Last visit: 10/24/2023 Posts: 486 Rating: (63)	Helmut_13 Hi, to only start the online test is not enough. You also need to start communication by click on the glasses. In addition each FB has glasses to activate it. I'm not sure if you can directly see the value oa AI and AQ. If not, then use Analog Amplifier and its glases. Hope this helps OMG!. Thank you Helmut_13, I'm sorry to came up with this dumb question, I've been under so much pressure lately and I've been failing alot Thank you, I don't know why i didn't remember that. In my fabric, I'm the one starting to use the LOGO!, most of the machines are controlled by S7, 300 und 400 series. Thanks again.

Suggestion To thank Quote Answer

6/5/2014 10:54 PM	Rate (0)
William_B Posts: 5225 Rating: (1182)	weirdooo Helmut_13 Hi, to only start the online test is not enough. You also need to start communication by click on the glasses. In addition each FB has glasses to activate it. I'm not sure if you can directly see the value oa AI and AQ. If not, then use Analog Amplifier and its glases. Hope this helps OMG!. Thank you Helmut_13, I'm sorry to came up with this dumb question, I've been under so much pressure lately and I've been failing alot Thank you, I don't know why i didn't remember that. In my fabric, I'm the one starting to use the LOGO!, most of the machines are controlled by S7, 300 und 400 series. Thanks again. Friend.. don't worry about it.. So you had a gray hair moment.. I have them all the time. Smile and say thanks. ..well you did the thanks already - - so just give us a smile. [smile]
William_B Posts: 5225 Rating: (1182)
Suggestion To thank Quote Answer

6/5/2014 11:17 PM	Rate (0)
Rescobedo Silver Member Joined: 11/5/2012 Last visit: 10/24/2023 Posts: 486 Rating: (63)

Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users desmul24 William_B

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on