Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Can´t upload G120C PN v4.7.9 to project

Created by: Isrich at: 7/11/2018 7:26 AM (6 Replies)

Rating (0)

Thanks 1

7 Entries

7/11/2018 7:26 AM	Rate (0)
Isrich Regular Member Joined: 10/28/2015 Last visit: 9/5/2023 Posts: 8 Rating: (0)	Hello everyone! I have made a project in TIA-portal v14 SP1 I have some drives, G120C PN 18,5kW (Art.#: 6SL3210-1KE23-8AF1) with firmware v4.7.9 After I´ve made the commissioning and some parameterization I wanted to upload the drive to my project but got an errormessage... see attachement.. I also have G120C PN 5,5kW (art#: 6SL3210-1KE21-3AF1) with firmware v4.7.6 which I uploaded to my project without problem... I´ve got: - TIA v14 SP1 - Startdrive v14 SP1 Upd 5 I´ve installed the HSP for Sinamics Firmware v4.7.9 Any ideas?? Thanks in advance.. Attachment Version Mismatch.PNG (332 Downloads)

Suggestion To thank Quote Answer

7/11/2018 7:48 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 12/11/2023 Posts: 21967 Rating: (2930)	Hello, before upload go to project -> upgrade. then you can upload the device regards Christoph
	Last edited by: ChristophD at: 7/11/2018 7:48:29 AM
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Isrich

7/11/2018 11:17 AM	Rate (0)
Isrich Regular Member Joined: 10/28/2015 Last visit: 9/5/2023 Posts: 8 Rating: (0)	Thanks!! It worked fine!

Suggestion To thank Quote Answer

9/13/2018 12:29 PM	Rate (0)
Cesare_Nicola Regular Member Joined: 5/14/2014 Last visit: 8/25/2023 Posts: 27 Rating: (0)	I have the same problem, but I can't find the item "project/upgrade". Where it is? Thanks
	Last edited by: Cesare_Nicola at: 9/13/2018 12:29:47 PM
Suggestion To thank Quote Answer

9/13/2018 12:41 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 12/11/2023 Posts: 21967 Rating: (2930)	in the project menu

Suggestion To thank Quote Answer

9/13/2018 1:42 PM	Rate (0)
Cesare_Nicola Regular Member Joined: 5/14/2014 Last visit: 8/25/2023 Posts: 27 Rating: (0)	I can't see anything like "upgrade".
	Last edited by: Cesare_Nicola at: 9/13/2018 1:42:32 PM
Suggestion To thank Quote Answer

9/13/2018 2:14 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 12/11/2023 Posts: 21967 Rating: (2930)	Hello, mak ascreen of the message you get for upload. make a screen of the projectmenu Which SW you use? Regards Christoph

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_G

Follow us on