Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Can the CPU neither be started nor restarted in stop mode?

Created by: AutoGen_9777900 at: 6/17/2023 5:34 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

6/17/2023 5:34 AM	Rate (0)
AutoGen_9777900 Joined: 6/14/2023 Last visit: 7/31/2023 Posts: 2 Rating: (0)	hi in stop mode? you can't start or restart the cpu?? i have a same problem ------------------------------------------------------------------------------------------ Split from CPU in stop mode.
	Last edited by: Jen_Moderator at: 06/19/2023 09:31:56 New subject after splitting
Suggestion To thank Quote Answer

6/19/2023 10:10 AM	Rate (0)
Stefan Arcularius Platinum Member Joined: 1/21/2013 Last visit: 9/13/2024 Posts: 3096 Rating: (483)	Hi, Please provide more details! Which PLC (part number and firmware version) is affected? Do you have engineering software (STEP 7, TIA Portal) and if so, what software and version are you using? What is the content of the diagnostic buffer? Please keep in mind that there are countless reasons why a CPU may stop. Please understand that we cannot help you without meaningful information. Kind regards Stefan

Suggestion To thank Quote Answer

6/19/2023 11:15 AM	Rate (0)
Towome Platinum Expert Joined: 7/9/2015 Last visit: 8/30/2024 Posts: 3943 Rating: (585)	Hi, if you have a Panel than you can use PLC Mode (Run/Stop). But check if it´s available for your PLC or your Panel. Otherwise do like Stefan suggested... Regards, Towome
	If my post was useful, please rate me - if not, please tell me - thank you!
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on