Hii All,

Can we use 153-2BA10-0XB0 with controller CPU 412-5H PN/DP?

------------------------------------------------------------------------------------------
Split from Can 153-2BA10-0XB0 use instead 153-2BA02-0XB0? .

KantapratS.

I found IM 153-2 Order No. 153-2BA02-0XB0 broken so I order new part to change to fix problem. When I order supplier tell me 153-2BA02-0XB0 was obsolete so offer 153-2BA10-0XB0 instead.

 After I get part I test in work shop make hardware config in Step7 by config 153-2BA02-0XB0 but the hardware is 153-2BA10-0XB0. After down load  hardware config not found any problem.

When I try to use 153-2BA10-0XB0 in process found problem Profibus network not active.

Network in process is S7-400 redundant network, can it be root cause?

How can I fix problem by config 153-2BA10-0XB0 in hardware config instead 153-2BA02-0XB0

 Hello,

IM "153-2BA10" can replace IM "153-2BA02" as you already tested in your workshop with some restrictions.

• For redundnacy (I mean S7-400H) controller, The two modules of the redbundle should be identical
  This means, that you have an old redbundle consists of 2 IM153-2BA02 + 1 Bus unit 195-7HD00. 
  If you have changed one IM to 2BA10, it wont' work until change the other module.
  The 2 IM modules of the redbundle should be identical (same part number and same FW versions)
• bus unit should be compatible with the insrted IMs
  Bus unit (195-7HD00) is not compatible with new IM.
  So you have to order the new part number (195-7HD10).
• Then change the part numbers in HW config and download to the CPU.

uj13

Hii All,

Can we use 153-2BA10-0XB0 with controller CPU 412-5H PN/DP?

Yes sure.

Hope this helps.