Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

can you able to guide me in DNC for 802d?

Created by: Keyan at: 12/14/2009 1:32 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

12/14/2009 1:32 PM	Rate (0)
Keyan Posts: 13 Rating: (0)	Keyan Hi friends, we are having sinumerik 840d / 802d in our machine shop. i want to transfer my programs from my pc. i am having Winpcin software with my pc. i am having RS 232 with DB9 connector and USB adaptor. this is my first time , communicating with cnc via RS232. so kindly help me to set the communication parameters in CNC and PC. Regards, keyan RAM81 hi please do as per the attached file with regards ram Thank you, RAM , now i can able to communicate with my CNC by RS 232 serial cable. can you able to guide me in DNC for 802d? i am using prozdnc software. Regards, keyan
Keyan Posts: 13 Rating: (0)	Last edited by: O_Moderator at: 12/14/2009 2:41 PM new subject after splitting from /tf/WW/en/Posts/37881#top
Suggestion To thank Quote Answer

3/12/2010 6:39 AM	Rate (0)
dipuvimal Posts: 2 Rating: (0)	plsdownload the attachment by dipu v Attachment 802D.pdf (259 Downloads)
dipuvimal Posts: 2 Rating: (0)	Last edited by: dipuvimal at: 3/12/2010 6:41 AM
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on