Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Can you use SFB4 in an FC?

Created by: Goodas at: 10/29/2009 8:19 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

10/29/2009 8:19 PM	Rate (0)
Goodas Posts: 37 Rating: (0)	Guy's Is it possible to use SFB4 in a multi-use FC. I need an on delay timer that can be used multiple times with a different time value, that can be used in a multiple use control block. I can do it in an FB but will end up using many instance data blocks. Any ideas appreciated. Goodas.
Goodas Posts: 37 Rating: (0)
Suggestion To thank Quote Answer

10/29/2009 8:34 PM	Rate (0)
Ammy Platinum Member Joined: 4/19/2008 Last visit: 9/3/2024 Posts: 1525 Rating: (159)	Hi Goodas, IF you call SFB4in FC you have to define DB for every Block you call . You can do one thing, Create FB & Call in multiple instance so it will create only one DB for one FB. Here is the FAQ for the Multiple Instance http://support.automation.siemens.com/WW/view/en/18723826 it must be helpful to you. Ammy.
	Ammy New for every one.............. “No duty is more urgent than that of returning thanks.” If Problem Solved......! I can't help you privately - please post in the Forums
Suggestion To thank Quote Answer

10/29/2009 11:35 PM	Rate (0)
Goodas Posts: 37 Rating: (0)	Cheers Ammy! That works a treat. Goodas
Goodas Posts: 37 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on