Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Cannot connect to LOGO not Accessible

Created by: sburg at: 4/23/2021 3:17 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

4/23/2021 3:17 PM	Rate (0)
sburg Posts: 2 Rating: (0)	I am really struggling to connect to my Logosoft 0AB0 module. I'm using logo-soft comfort v8.2.1 Logo IP address is 192.168.0.3 sub net 255.255.255.0 Pc IP is 192.168.0.7 sub net 255.255.255.0 I can ping the LOGO via Cmd and get a reply, but when i try and go online the LOGO is unreachable with a red question mark. Also does not show up when I refresh the online settings in the LOGO settings. It does allow me to connect but again does not show up in the Accessible LOGO window. What am I doing wrong?
sburg Posts: 2 Rating: (0)
Suggestion To thank

4/23/2021 3:22 PM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 12/5/2023 Posts: 31552 Rating: (3920)	Hello sburg, please don't post twice for the same Problem.

Suggestion To thank

4/26/2021 9:04 AM	Rate (0)
Jen_Moderator Moderator Joined: 6/19/2017 Last visit: 12/5/2023 Posts: 7588 Rating: (157)	Closed cause question posted twice. The second thread with the subject Logo is unreachable is published within the conference LOGO! - Software. Best regards, Jen_Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards Jen_Moderator
Suggestion To thank

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on