Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

cannot control s7-1200 by Laptop

Created by: TonyKhoa at: 11/19/2014 8:02 PM (4 Replies)

Rating (0)

Thanks 0

5 Entries

11/19/2014 8:02 PM	Rate (0)
TonyKhoa Posts: 17 Rating: (0)	dear all, My problem is that: i can connect to s7-1200 cpu 1214c firmware 3.0 via laptop use ethernet communication(tia portal 13.0). i can program and transfer to plc, my systems working well until i creat a screen to control plc. my screen is very simple, but i cannot control plc by screen . i also use my laptop as a hmi but may be it not work. i see somes online course in internet, but they use a real hmi , but i use a laptop as a hmi. my question is: can make a screen to control plc by laptop . if yes, can someone give me a small video how to do that. i'm really newbie in tia potal. thank in advanced.
TonyKhoa Posts: 17 Rating: (0)
Suggestion To thank Quote Answer

11/19/2014 10:13 PM	Rate (0)
RUN Industrial Au... Bronze Member Joined: 12/13/2013 Last visit: 9/30/2024 Posts: 135 Rating: (3)	Dear Tonykhoa, you have to tell us which Enginnering Software you had used to creat the screens for controlling the PLC. TIA is software package, cant tell which specific software you are using. Regards.
	We Keep Your Plant Running
Suggestion To thank Quote Answer

11/20/2014 3:51 AM	Rate (0)
TonyKhoa Posts: 17 Rating: (0)	Dear ADDIS ABABA, I only use wincc v13.0 to creat a screen, but when i start runtime , the screen can not control the plc , any button , io filed is not working, i think i have the problem with the connection betwwen pc and Wincc RT, when i make a connection, it say : Can not connect with the plc ip ...., something like that. Do i need to install the winncC Runtime advanced ? because i see in other forum, thay say i need to install Wincc Run Time advanced software . But i cant find it in internet. Do someone have a link of WinccRuntime Advanced V13 ? Thank in advanced .
TonyKhoa Posts: 17 Rating: (0)
Suggestion To thank Quote Answer

11/20/2014 6:42 AM	Rate (0)
TonyKhoa Posts: 17 Rating: (0)	Dear all, following image is the connection error notice . Can someone know what wrong with my systems ? Attachment connection error pdf.pdf (160 Downloads)
TonyKhoa Posts: 17 Rating: (0)
Suggestion To thank Quote Answer

11/20/2014 9:11 PM	Rate (0)
RUN Industrial Au... Bronze Member Joined: 12/13/2013 Last visit: 9/30/2024 Posts: 135 Rating: (3)	Dar TonyKhoa, what you are doing is some thing different. you have created some project and trying to down load to HMI ( kindly read the title bar of your attachemnt) the IP adress it is looking for is target HMI . Regards.
	We Keep Your Plant Running
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on