Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Cant download to 315 2 PN/DP

Created by: Patrikk at: 3/8/2010 12:33 PM (4 Replies)

Rating (0)

Thanks 0

5 Entries

3/8/2010 12:33 PM	Rate (0)
Patrikk Posts: 131 Rating: (1)	Dear all what should i use in Step 7 PG/PC communication in order to establish a connection to a 315 2PN/DP CPU ? I ve tried to connect 315 2DP and it works fine. Tell me plese wat are the possible issues i can check or dignose in order to make a connection to the 315 2 PN/DP. Thanks in advance.
Patrikk Posts: 131 Rating: (1)
Suggestion To thank Quote Answer

3/8/2010 1:45 PM	Rate (0)
Darius Platinum Member Joined: 9/28/2005 Last visit: 12/10/2024 Posts: 2957 Rating: (243)	Hello, Tell us at least what interface you trying to use ? Try to look here at least and maybe you'll find the problem.
	Best regards, Darius
Suggestion To thank Quote Answer

3/9/2010 12:35 PM	Rate (0)
Patrikk Posts: 131 Rating: (1)	dear darius, im trying to connect through MPI but i can only acccess the blocks through the Accessbile Nodes and i can copy paste them normally. But i need to know why it gives me an error message if i want to go online with using Accessible Nodes ? also i cant see the Hardware dignostics or Module Information.
Patrikk Posts: 131 Rating: (1)
Suggestion To thank Quote Answer

3/10/2010 7:19 AM	Rate (0)
Darius Platinum Member Joined: 9/28/2005 Last visit: 12/10/2024 Posts: 2957 Rating: (243)	Hello, I don't understand something. Why you go online through accessible nodes ? If you are able to go with accessible nodes online then you know correct comm parameters. So if you have project then go online as usual and if you have no project then upload it and use as usual. Don't understand what's the problem if you are able to go online ?
	Best regards, Darius
Suggestion To thank Quote Answer

3/10/2010 8:46 AM	Rate (0)
Patrikk Posts: 131 Rating: (1)	Dear Darius, when i click in Step 7 to Go Online it gives me an error message and i cant go online. While if click Accessible Nodes it will normally show me the everything on the CPU. Other than that i cant access in any other way.
Patrikk Posts: 131 Rating: (1)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on