Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Card Unknown

Created by: Drking100 at: 2/1/2017 5:51 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

2/1/2017 5:51 PM	Rate (0)
Drking100 Posts: 31 Rating: (0)	Hi there! when i put the memmory card in the memory slot, the reading stops and a message appears "Card unknown". I tried with other memory cards and the same error appears. What can i do? LOGO : 6ED10521MD000BA8 When i transfer the program using "PC-LOGO" option everything went well and the program is on LOGO. Only the memory card fails. Thanks,
Drking100 Posts: 31 Rating: (0)
Suggestion To thank Quote Answer

2/1/2017 6:09 PM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 11/8/2024 Posts: 34177 Rating: (4256)	The SD card must be formatted "FAT32", otherwise the LOGO! The SD card does not. Simply format SD card with FAT32.

Suggestion To thank Quote Answer

3/22/2018 12:15 PM	Rate (0)
OssiT Posts: 1 Rating: (0)	Drking100 Did You succeed to solve the problem? I have also tried different SD cards with different cluster sizes and FAT32, but none of those combinations has been recognized by Logo 0BA8.
OssiT Posts: 1 Rating: (0)	Last edited by: OssiT at: 3/22/2018 12:17:12 PM
Suggestion To thank Quote Answer

4/3/2018 1:15 PM	Rate (0)
Jen_Moderator Diamond Member Joined: 6/19/2017 Last visit: 9/6/2024 Posts: 8175 Rating: (172)	New question published by Goedhuja is split to a separate thread with the subject When go to diagnostics get "SD card read/write error". Best regards Jen_Moderator

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on