Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

CentreCom AT210TS Adapter (AUI to RJ45)

Created by: RBK at: 9/17/2008 12:04 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

9/17/2008 12:04 PM	Rate (0)
RBK Posts: 1 Rating: (0)	Communication between Simatic S5 with SINEC CP 1430 TF Basic (6GK1143-0TA00) and WinCC 6.0 SP4not working when the CentreCom AT210TS Adapter (AUI to RJ45) is used. But directly without the adapter it is working. Communication protocol is ISO. Ramesh
RBK Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

9/17/2008 2:02 PM	Rate (0)
legacy support Silver Member Joined: 7/15/2008 Last visit: 12/12/2024 Posts: 382 Rating: (44)	Hello RBK There are divernt Modles, that use diverent Data Link Protokols : Please check your Model.
	Last edited by: legacy support at: 9/17/2008 2:08 PM
Suggestion To thank Quote Answer

9/18/2008 12:12 AM	Rate (0)
J_Bell Posts: 5822 Rating: (412)	Dear Ramesh, I am sorry but the CP 1430 does not need any converter for AUI to RJ45 at all. The CP provides an automatic switch over from AUI to ITP. ITP is signal compatible to RJ45 signals and can be directly used. Please check the Twisted Pair Manual by SIMATIC NET. SIMATIC NET Twisted-Pair and Fiber-Optic Networks Best regards J_Bell
J_Bell Posts: 5822 Rating: (412)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on