Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

CFC Editior

Created by: Kunjandi at: 11/1/2012 3:17 AM (3 Replies)

Rating (1)

Thanks 0

4 Entries

11/1/2012 3:17 AM	Rate (0)
Kunjandi Posts: 113 Rating: (0)	I want know about CF chart...How i can make a Cf chart is it posible to make in Simatic amnger or or need new software for CFC edition?
Kunjandi Posts: 113 Rating: (0)
Suggestion To thank Quote Answer

11/1/2012 10:55 AM	Rate (1)
crazyCow Gold Member Joined: 12/4/2009 Last visit: 2/27/2023 Posts: 452 Rating: (132)	Pada, to be able to use CFC, Simatic manager is not enough. In addition you'll need Simatic CFC, desirable in version corresponding to those of Simatic Step7. When you install CFC, open Smatic Manager and right click S7 program folder. You should be able to insert CFC chart folder. Inside CFC chart folder create CFC chart and start programming. Do not mix CFC and classic S7 programming. Be careful, not all S7 CPU's support CFC. Regards.
	Last edited by: kjurlina at: 11/1/2012 10:55 AM Last edited by: crazyCow at: 3/29/2016 1:25:03 PM If this post actually helped, you may consider using the Rate button above.
Suggestion To thank Quote Answer

11/1/2012 8:32 PM	Rate (0)
hdhosseini Diamond Expert Joined: 1/28/2009 Last visit: 2/21/2023 Posts: 6794 Rating: (1340)	pada I want know about CF chart...How i can make a Cf chart is it posible to make in Simatic amnger or or need new software for CFC edition? Hello, Reading section 1.1 (CFC for S7) is recommended.Also check the following Webcast Tutorial. And this is the newly added "SIMATIC Webcast Tutorial" on CFC: Graphic Programming with the CFC editor (new) and the complete list here: http://support.automation.siemens.com/WW/view/en/34008480 Best regards, Hamid Hosseini
	Demo Channel on Youtube
Suggestion To thank Quote Answer

11/2/2012 3:44 AM	Rate (0)
Kunjandi Posts: 113 Rating: (0)	Thnks
Kunjandi Posts: 113 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on