5/6/2010 3:35 PM | |
Joined: 10/17/2007 Last visit: 2/14/2025 Posts: 4189 Rating:
|
========================= you use 840D+611D, find in Drive MD,--> MD 1017, set it=1, power on reset-->when every enabling OK again your motor will turn. and in MD1016 will give you some value (such as=31.6 degree) save it .check attachment on page 140for detail. good luck and post your feed back AttachmentIADC.zip (410 Downloads) |
If you like my comments please |
|
Follow us on