Navigation

Change connection

Created by: Hike at: 3/29/2010 9:54 AM (1 Replies)

3/29/2010 9:54 AM	Rate (0)
Hike Posts: 138 Rating: (0)	Guyz, my system consist of 2 CPU 315-2DP and 2 CP343-1-Lean with software redundancy. Now i need to connect TP1500 Basic PN with my TP. Now the problem is that it works fine with 1 CPU but i need to change connection to second CPU when the master fails. Tell me how to do it. Thanks in anticipation
Hike Posts: 138 Rating: (0)
Suggestion To thank Quote Answer

3/29/2010 10:51 AM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 1/24/2025 Posts: 8808 Rating: (1177)	Dear Hike, Perhaps this link, might help: http://support.automation.siemens.com/WW/view/en/35508221 Or this thread: /tf/WW/en/Posts/31985 Best regards, Wizard
	Last edited by: Wizard at: 3/29/2010 10:53 AM Link added
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users gbs